Cleaning your cooker, Essential information, Hotplate burners – Rangemaster 90 Gas User Manual

Page 16

Advertising
background image

16

Cleaning your cooker

Essential information

Before thorough cleaning isolate the electricity
supply. Remember to switch on the electricity

supply before use.

Never use paint solvents, washing soda,
caustic cleaners, biological powders,
bleach, chlorine based bleach cleaners,
coarse abrasives or salt. Don’t mix
different cleaning products - they may
react together with hazardous results.
Recommended cleaning materials are
shown in the table at the end of this
section.

If you want to move your cooker for cleaning,
see the section called ‘Moving your cooker’.

All parts of the cooker can be cleaned with hot
soapy water - but take care that no surplus
water seeps into the appliance.

For cleaning materials see the ‘Cleaning Table’
at the end of this section.

Hotplate burners

Some models have a separate trim ring, which
fi ts on the burner head.

The burner heads and caps can be removed
for cleaning. Make sure they are absolutely dry
before replacing.

The LH hotplate

A cap, B head, C notch, D base, E electrode

When refi tting the burner head, make sure that
the notch lines up with the electrode or hole in
the base. Check that the burner head is level
and that the cap is fi tted centrally on the burner
head.

The Wok burner

The Wok burner is a little more complicated but
it also can be taken apart for cleaning.

Wok burner

A inner burner cap,

B

outer burner cap

C inner burner head

D

outer burner head

E Wok burner base

When reassembling the Wok burner, turn over
the large base ring and fi nd the ‘D’ shaped area.

burner base underside of burner head

Turn the head until the ‘D’ matches the one on
the burner base. Turn the head over and place it
on the burner base.

Advertising