Rangemaster 90 Gas - Manual (Page 25)

25
Dear Installer
Before you start your installation, please complete the details BELOW.
If your customer has a problem relating to your installation they will be able to contact you easily.
Thank you
Installer’s Name
Installer’s Company
Installer’s Telephone number
You will need the following equipment to complete the cooker
installation satisfactorily
STABILITY BRACKET
If the cooker is to be
supplied with gas through
a fl exible hose, a stability
bracket or chain must be
fi tted.
These are not supplied
by with the cooker but are
available at most builders
merchants.
GAS PRESSURE TESTER
It is important the gas
pressure is set correctly
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards. For
LP Gas it should be suitable
for LPG, capable of 50mbar
pressure, 70°C temperature
rise and carry a red stripe,
band or label.
A hose is not supplied by
with the cooker.
MULTIMETER
(for electrical checks)
Make sure the installation is
electrially safe.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit & Rawlplugs
(only required if fi tting the cooker on a
stone or concrete fl oor)
3. Steel tape measure
4. Cross head screwdrive
5. Flat head screwdriver
6. Spirit level
7. Pencil
8. Adjustable
spanner
9. Screws for fitting stability bracket