Revox Re:source MMM User Manual
Page 27
Multi Media
Re:source
26
Info - Status overview
The Info softkey shows the status
of the currently selected source.
In the example shown below, the
track When I Kissed The teacher
by ABBA from the Album Arrival is
playing. This title was stored with a
data rate of 192 Kbps.
Bit rate [kpps]
The data rate with which the
selected radio station transmits or a
track was compressed.
Buffer [%]
The filling level of the MMM data
buffer that is used to balance out
MMM fluctuations in the data
streaming. The buffer display should
always be 100%. If it reaches 0%,
playback is stopped until data is
received again.
Wifi Level [%]
The Wifi level displays the
strength of the Access point
reception. If this should get
too low, you may have to reposition
it.
The Wifi level does not indicate
anything about the speed of the
Internet access.
The Wifi level is displayed
permanently, even in the case of
sources that do not receive their
data over the WLAN, e.g. a USB
hard disc.
L
Walls, atmospheric pressure and
humidity affect the quality of the
WLAN wireless connection, as well
as the positioning of the components.