Revox Re:source MMM - Manual (Page 43)

Multi Media Re:source
42
N
ETWORK QUESTIONS
/
TIPS
The MMM finds my Access
Point, however my computer is
not displayed.
• Make sure you have installed a
UPnP server on your computer
and that this is activated.
Depending on the amount of data
and the software, it can take a
few seconds before the option
appears as a selection on the
MMM.
• You have activated a MAC
address filter on your router. In
this case, add the MMM MAC
address to you router
configuration. You will find this on
Setup page #1.
• Your router only assigns fixed
IPs. Deactivate DHCP and enter
a fixed IP address both in the
MMM and the router.
My Access Point's SSID is not
listed.
• The MMM can only find your
Access Point if it is within range.
Reduce the distance to the
Access Point and try again.
• Depending on the configuration,
the router's SSID may be hidden.
If this option is activated, the
SSID must be entered manually
on page #3 of the MMM Setup
menu.
N
ETWORK QUESTIONS
/
TIPS
A lot of Access Points are
displayed that are unknown to
me.
If several Access point, for example
those installed in neighbouring
buildings are available to the MMM,
these will also be listed. Select your
Access Point and continue with the
configuration.
The MMM indicates to me that
my network is encrypted.
Your network is protected against
external attacks with an encryption
(WEP / WPA). Enter your key in
the MMM Setup so that the MMM
is identified as "User" in the
network.
Where do I get my key from?
If you installed your network
yourself, you will have defined it as
part of that work. Otherwise, you
will get it from your System
Administrator
Can other data on my network
hard disc or server by read or
viewed?
No, the MMM can only receive data
that is released by the UPnP
server. In this way, the MMM only
accesses your files. Other data on
your server is not transferred and
cannot be viewed.