RCA ProV600 - Manual (Page 34)

32
Recording
Date/Time Display — Setting the Time and Date
The correct date and time must be set before it can be displayed and
recorded on your tapes. The clock cell must be installed as shown on
the previous page before the date can be set and recorded.
Set the Time and Date
1. Make sure the camcorder is in the
record-pause mode.
2. Press and hold the DATE and FOCUS
LOCK buttons together until the reset
time and date appear.
A flashing cursor lets you know which
part of the display you are setting.
3. Repeatedly press the DATE button
until the correct month appears.
4. Then press the FOCUS LOCK button
to move the flashing cursor to the next
part of the display.
5. Repeat steps 3 and 4 until you have
entered the correct month, day, year,
hour with AM or PM, and minutes.
6. After you set the minutes, press the
FOCUS LOCK button to start the
clock and remove the flashing cursor
from the display.
Correct the Time and Date
1. Make sure the camcorder is in the
record-pause mode.
2. Press and hold the DATE and FOCUS
LOCK buttons together until the reset
time and date appear.
3. Correct the time and/or date using the
DATE and FOCUS LOCK buttons.
DATE Button
FOCUS LOCK Button
AM 0:00:00
1.1.1997
Time and Date Display