RCA ProV600 - Manual (Page 7)

First-Time Operation
5
4. Attach the adapter/charger.
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
• Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
• Press the OPEN button and open
the monitor.
• Connect the other end of the DC
cable to the DC IN jack on the
camcorder and run the cable
through the cutout as shown.
• Plug the adapter/charger’s plug
into an operating outlet. The
adapter/charger’s POWER
indicator will light.
POWER
Indicator
DC OUT
Jack
DC Cable
Adapter/
Charger
To AC
100-240V,
50/60 Hz
DC IN Jack
OPEN
Button