Excelnt – ResMed escape s8 User Manual

Page 17

Advertising
background image

13

H

OW

TO

U

SE

THE

S8 A

UTO

S

ET

S

PIRIT

E

NG

LI

SH

if your clinician has enabled SmartStart, simply remove your mask and treatment will
end.

U

SING

THE

M

ASK

-F

ITTING

F

EATURE

You can use the S8

A

UTO

S

ET

S

PIRIT

mask-fitting feature to help you fit your mask

properly. This feature delivers air pressure for a three-minute period, prior to starting
treatment, during which you can check and adjust your mask fit to minimise leaks.
Note: Make sure that the mask setting on the MASK screen is the same as the mask you
are using.
To use the mask-fitting feature:

1

Fit your mask as described in the mask user instructions.

2

Hold down the

Start/Stop key for at least three seconds until air pressure delivery

starts.

The following display will appear on the LCD screen indicating that the mask-fitting
feature is operating. Your S8 device will ramp to the mask-fit pressure and will remain
at this pressure for three minutes.
The LCD also displays a mask-fit star rating. See “Definitions of Mask-Fit Star Rating”
on page 14.

Note: The mask-fit star rating display disappears after three minutes.
The mask-fitting feature can only be started from the RAMP or SETTLING screen.

In AutoSet mode, the mask-fit pressure is the highest pressure that you are likely to receive
based on the previous night’s session or 10 cm H

2

O, whichever is greater.

In CPAP mode, the mask-fit pressure is the set treatment pressure or 10 cm H

2

0,

whichever is greater.

3

Adjust your mask, mask cushion and headgear until you have a secure and comfortable
fit.

Once you have a secure and comfortable fit, check your mask-fit star rating on the
LCD screen. Table 4 explains the mask-fit star ratings.
Note: If there is another person nearby to check your mask-fit star rating, you can adjust
your mask, mask cushion and headgear while lying down.

4

After three minutes, the pressure reverts to the set pressure and treatment will begin.

If you do not wish to wait three minutes, hold down the

Start/Stop key for at

least three seconds to start treatment immediately.

MASK FIT: *****

excelnt

mask-fit star rating

Advertising