ResMed escape s8 - Manual (Page 43)

39 S YSTEM S PECIFICATIONS
E
NG
LI
SH
S
YSTEM
S
PECIFICATIONS
S8 A
UTO
S
ET
S
PIRIT
(
NO
A
CCESSORIES
)
Performance: Operating pressure range: 4 to 20 cm H
2
O
Dimensions (H x W x D): 112 mm x 164 mm x 145 mm
Weight: 1.3 kg
Power Supply
•
Input range for S8 A UTO S ET S PIRIT
with H UMID A IRE 3i : 100–240 V, 50/60 Hz; 110 V,
400 Hz; 2.5A <140 VA (110 W) (maximum power consumption). Instantaneous
peak power consumption <340 VA.
•
Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed
DC-12 converter for DC input.
Actual power consumption will vary, depending on factors such as the use of
accessories, height above sea level and ambient temperature. Power consumption
values for typical treatment conditions (using a breathing machine set to 0.5 L and
15 breaths/min with 2 m air tubing and an
U LTRA M IRAGE
mask) are given in the
following table
Power outlet for HumidAire 3i
Outlet range: 100–240 V, 50/60 Hz; 110 V, 400 Hz; 2.0A
Air Filter: Two-layered, powder-bonded, polyester non-woven fiber
Air Tubing: Flexible plastic, 2 m
Air Outlet: The 22 mm conical air outlet complies with EN 1281-1
IEC 60601-1 Classifications: Class II (double insulation), Type CF
Noise level: Radiated sound pressure is measured at <30 dBA at 10 cm H
2
O and
1 m according to ISO17510
A CCESSORIES
D ATA C ARD
Dimensions (L x W x D): 65.04 mm x 22.15 mm x 0.85 mm
Device
Pressure
(cm H
2
O)
Power
(VA) Power
(W)
S8 AutoSet Spirit 5 18 7.6
10 23 11.6
15 30 15.9
20 39 20.7