Io connectors – RadioLAN DockLINK User Manual
Page 101
Advertising
890-010 12/04/98
Page 93
© 1998 RadioLAN.
IO Connectors
10BaseT connector
The 10BaseT interface is provided through a shielded RJ-45 connector, which can be configured via the
MDI/MDI-X switch. The pin-out is described in the following table and figure:
Pin #
Signal (MDI configuration)
Signal (MDI-X configuration)
1
TX+ (Transmit to UTP)
RX+ (Receive from UTP)
2
TX- (Transmit to UTP)
RX- (Receive from UTP)
3
RX+ (Receive from UTP)
TX+ (Transmit to UTP)
4
No connection
No connection
5
No connection
No connection
6
RX- (Receive from UTP)
TX- (Transmit to UTP)
7
No connection
No connection
8
No connection
No connection
8 7 6 5 4 3 2 1
Advertising