RadioLAN DockLINK - Manual (Page 50)

890-010 12/04/98 Page 42 © 1998 RadioLAN.
Accept/Reject
The
Accept/Reject column allows you to allow or disallow transmission of the packet, depending upon the entry in
the
Source/Dest column.
For example, if the
Source/Dest column contains Source, and the Accept/Reject column contains Reject, the
DockLINK will not allow a message broadcast from that MAC Address to pass through.
If the
Source/Dest column contains Destination, and the Accept/Reject column contains Reject, the DockLINK will not
allow the message intended for that MAC Address to pass through.
Alternatively, If the
Source/Dest column contains Source, and the Accept/Reject column contains Accept, the
DockLINK allows the message from that MAC Address to broadcast through.
If the
Source/Dest column contains Destination, and the Accept/Reject column contains Accept, the DockLINK allows
the message from that MAC Address to pass through.
Adding MAC Filters
To add up to 32 MAC filters, select the first available (blank)
Item on the list:
1. Type in the
MAC Address and Subnet Mask Bits.
2. Select whether the filter will be invoked when the address is sending a packet or when it is receiving a packet:
Choose
Source if you want to filter messages that are broadcast from the MAC Address.