RadioLAN DockLINK - Manual (Page 24)

890-010 12/04/98 Page 16 © 1998 RadioLAN.
Using the DockLINK Manager
The DockLINK Manager allows you to interrogate and interact with the DockLINK from the local station using a
Web browser. Your browser must support Java script and frames. After launching your browser, enter the IP
Address for the DockLINK. If you just setup the DockLINK for the first time, you should have already assigned the
DockLINK’s IP Address using the IP ASSIGN Utility, or with the VT-100 terminal.
This section discusses how to log onto the DockLINK, and how to use the DockLINK Manager.
The DockLINK Manager
The DockLINK Manager allows you to view pages, which contain configuration information about the DockLINK.
Using the manager, you can assign passwords, set up IP Address for the DockLINK, set address filters, and view
DockLINK performance statistics.
When using the DockLINK Manager to make changes, edit your choices on the manager’s pages, then accept all
session changes by accessing the S
YSTEM C ONFIGURATION - C ONFIGURATION C HANGES page. This causes the
DockLINK to store configuration changes. Changes take effect after you save the changes and reset the
DockLINK.