3) replacing the oscillator circuit boards – Renesas Emulation Pod M30620T2-RPD-E User Manual
Page 34
Advertising
( 32 / 78 )
(3) Replacing the Oscillator Circuit Boards
Figure 3.8 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit
board, see Figure 2.2.
Figure 3.8 Replacing the oscillator circuit boards
(3) Attach the J1 connector of another oscillator circuit board
for replacement to the J5 connector of the MCU-dependent
board M30620T2-PRT.
(4) Secure the oscillator circuit board with the screw.
(1) Unscrew the screw connecting the oscillator circuit board.
(2) Lift off the oscillator circuit board.
Advertising