Renesas Emulation Pod M30620T2-RPD-E - Manual (Page 70)

( 68 / 78 )
Chapter 6. Troubleshooting
6.1 Flowchart to Remedy the Troubles
Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected.
Figure 6.1 Flowchart to remedy the troubles
LED status not normal
Display not normal.
Error displayed.
Turning on the power of PC4701
Program window of emulator debugger displayed
Front panel LED status of
PC4701
Init dialog box of emulator
debugger displayed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
1. Check emulator system connections.
See, "3.4 Connecting the PC4701 and Emulation Pod"
(page 33).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 40).
3. Restart the PC4701 system.