Ricoh 3245 User Manual
Page 29
Memory Transmission
21
2
FFFF
Specify a destination.
Note
❒ Pressing
switches the des-
tination list between fax num-
ber, e-mail address, and IP-Fax
number.
❒ If you want to specify another
destination, repeat steps
E
and
F
.
GGGG
Press the
{{{{Start}}}} key.
Note
❒ Do not lift the ADF during scan-
ning.
After scanning, the standby dis-
play appears.
-
-
-
-Sending originals using the
exposure glass
A
Make sure that Memory TX is se-
lected.
B
Place the first page of your original
face down on the exposure glass.
C
Dial a destination.
D
Make the scan settings you re-
quire.
E
Press the
{{{{Start}}}} key.
The machine starts scanning.
F
Place the next original on the expo-
sure glass within 60 seconds after
the machine has finished scanning
the first original.
G
Repeat steps
D to F for all origi-
nals.
H
Place the last original, and then
press [
#
#
#
#].
JupterC2_Fax_EN-F_FM.book Page 21 Tuesday, November 30, 2004 2:47 PM