Radio Shack PRO-94 - Manual (Page 55)

55 Trunking Operation
Note: When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
100-12 ,
100-9 , 000-12 , or 400-8 .
How do you know if the preset map you selected is cor-
rect? Listen to find out if you are following complete con-
versations. If not, try another preset map.
Programming a Fleet Map
1. Set the scanner for conventional scanning. Press
PROG then TRUNK .
2. Press the number key of the bank where you want
to store the fleet map.
3. Repeatedly press
8 8 8 8
or
9 9 9 9
until E1 appears, then
press E . A trunked frequency you previously pro-
grammed appears.
4. Press DATA . A preprogrammed fleet map appears.
5. Repeatedly press
8 8 8 8
or
9 9 9 9
until USr appears.
Then press E .
6. Press DATA .
7. Repeatedly press
8 8 8 8
or
9 9 9 9
to select the size code
for the first block, then press E . The next available
block appears.
8. Repeat Step 7 until you have selected a size code
for each desired block.
9. Press SRC (LIMIT) . The scanner exits the trunking
programming mode, tunes the data channel, then
searches using the map you programmed.
Size Code
Block
20-524A.fm Page 55 Tuesday, June 27, 2000 3:41 PM