Raypak 130A - Manual (Page 7)

7
WARNING: Use of any parts not manufactured
and/or approved by the manufacturer will void the
warranty.
Ambient Temperature Rating of
Components
• Millivolt heater +32°F to +175°F
• Electronic heater only -40°F to +175°F
Model Identification
The model identification number and heater serial
number are found on the heater rating plate.
The model identification number will be similar to
PR130A- EN-X, where:
• "EP" designates an Electronic heater using Propane
gas
• "EN" designates an Electronic heater using Natural
gas
• "MP" designates a Millivolt heater using Propane gas
• "MN" designates a Millivolt heater using Natural gas
• "P" prefix designates plastic (Polymer) headers
• "X" suffix designates Cupro-Nickel tubing
• "C" suffix designates Copper tubing
Heater
Rating
Plate
Fig. 2: Location of Heater Rating Plate
Specifications
Unpacking
On receipt of the heater it is suggested that visual
checks are made for external damage to the shipping
carton. If the carton is damaged, make a note to that
effect on the Bill of Lading when signing for the ship-
ment. Remove the heater from the shipping
packaging. Report any damage to the carrier immedi-
ately.
On occasion, items are shipped loose. Be sure that the
correct number of packages are received, as indicated
on the Bill of Lading.
Claims for shortages and damages must be filed with
the carrier by consignee. Authorization to return goods
must be received from the factory prior to shipping.
Goods returned to the factory without an authorized
Returned Goods Receipt number will not be accepted.
All returned goods are subject to a restocking charge.
When ordering parts, specify the model and serial
number of the heater. When ordering under warranty
conditions, specify the date of installation. Records of
the installation must be provided, when requested, to
substantiate a claim.
Debits for defective replacement parts will not be
accepted and will only be replaced in kind per the
manufacturer's standard warranties.
Model
No.
Input
(BTUH)
Gas
Conn.
(NPT)
Water
Conn.
Shipping
Weight, Std.
Heater
w/Stackless
Top
130A 130,000 1/2 in.
1-1/2
in. or 2
in.
NPT
140 lbs.
Table B: 130A Specifications