GIGABYTE GA-MA790FXT-UD5P - Manual (Page 11)

Hardware Installation - 11 -
Internal Connectors  1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x floppy disk drive connector
 1 x IDE connector
 10 x SATA 3Gb/s connectors
 1 x CPU fan header
 2 x system fan headers
 1 x power fan header
 1 x North Bridge fan header
 1 x front panel header
 1 x front panel audio header
 1 x CD In connector
 1 x S/PDIF In/Out header
 1 x IEEE 1394a header
 2 x USB 2.0/1.1 headers
 1 x parallel port header
 1 x serial port header
 1 x chassis intrusion header
 1 x power LED header
 1 x power switch
 1 x reset switch
 1 x clearing CMOS switch
Back Panel  1 x PS/2 keyboard port
Connectors  1 x PS/2 mouse port
 1 x coaxial S/PDIF Out connector
 1 x optical S/PDIF Out connector
 2 x IEEE 1394a ports
 8 x USB 2.0/1.1 ports
 2 x RJ-45 ports
 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
I/O Controller  iTE IT8720 chip
Hardware Monitor  System voltage detection
 CPU/System temperature detection
 CPU/System/Power fan speed detection
 CPU overheating warning
 CPU/System fan fail warning
 CPU/System fan speed control (Note 4)
BIOS  2 x 8 Mbit flash
 Use of licensed AWARD BIOS
 Support for DualBIOS TM
 PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b