GIGABYTE GA-MA790FXT-UD5P - Manual (Page 79)

Unique Features - 79 -
4-7 Teaming
Dual LAN with Teaming functionality enabled on this motherboard allows two single connections to act as
one single connection for twice the transmission bandwidth, making data transmission more effective and
improving the quality of transmission of distant image(s). Fault tolerance on the dual LAN network
prevents network downtime by transferring the workload from a failed port to a working port.
•
The speed of transmission is subject to the actual network environment or status even with Teaming enabled.
•
To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch
or router device supports the IEEE 802.3ad LACP standard. Please refer to your network switch or router device
manual for further details.
Select Realtek Ethernet Teaming Utility and
click Install.
Step 1:
Insert the motherboard driver disk and select Appli-
cation Software, Install Application Software.
Click Install under Realtek Ethernet Teaming Util-
ity for installation. Restart your system when completed. Step 2:
Click the Start icon
. Point to All Programs,
Realtek Teaming and VLAN, Realtek Teaming
and VLAN Utility to access the utility.
Step 3:
Select the two adapters
and set up the Teaming
mode based on your
hub's specifications.
Then click the Team-
ing button. (Two dia-
log boxes will appear
during the setup
Step 4:
After the Teaming is created, you will see only
one connection in Network and Sharing Center.
process, click OK to continue). When the Create
Virtual Adapter For Teaming Complete dialog
box appears, click OK to complete.
Step 5:
Click View status in
Network and Sharing
Center and you will see
the connection speed is
2.0 Gbps.
If you want to remove the
existing Teaming, ac-
cess the Realtek Vlan
& Teaming Utility and
click the Remove button.
Removing the Existing Teaming: