Radio Shack CID 940 - Manual (Page 10)

10 Preparation
Warning: Dispose of old batteries promptly and properly. Do
not burn or bury them.
Caution: If you do not plan to use the receiver with batteries for
a month, remove the batteries. Batteries can leak chemicals
that can destroy electronic parts.
Using AC Power
You can also power the system’s receiver using an optional 9V,
200-mA AC adapter and a size M Adaptaplug
TM adapter (avail-
able at your local RadioShack store).
Cautions:
You must use a Class 2 power source that sup-
plies 9V DC and delivers at least 200 mA. Its cen-
ter tip must be set to positive and its plug must fit
the receiver's DC 9V jack. Using an adapter that does not
meet these specifications could damage the receiver or the
adapter.
• Always connect the AC adapter to the receiver before you
connect it to AC power. When you finish, disconnect the
adapter from AC power before you disconnect it from the
receiver.
1. Insert the Adaptaplug into the adapter’s cord so it reads
TIP +.
2. Insert the Adaptaplug into the receiver’s DC 9V jack.
3. Plug the adapter into a standard AC outlet. ID TO LEARN
appears.
!
43-940.fm Page 10 Tuesday, April 25, 2000 1:04 PM