Radio Shack CID 940 - Manual (Page 11)

11 Preparation
CONNECTING THE SYSTEM
The system’s transmitter connects to any modular phone jack
and your phone. You can also connect it to an answering ma-
chine.
Note: To insure proper operation, always connect the system’s
transmitter directly to a wall jack.
Connecting to a Single-Line Phone
1. Disconnect the line cord from
your phone and plug it into the
transmitter’s
LINE-IN jack. Be
sure the other end of the line
cord is directly connected to a
wall jack.
2. Plug one end of the supplied
line cord into the transmitter’s
LINE-OUT jack.
3. Plug the other end of the cord into the phone’s jack.
Connecting to an Answering Machine
1. Plug a telephone line cord from the phone line into the
transmitter’s LINE-IN jack. Be sure the other end of the line
cord is directly connected to a wall jack.
2. Plug one end of the supplied line cord into the transmitter’s
LINE-OUT jack and plug the cord’s other end into the
answering machine’s line jack.
LINE-IN LINE-OUT
43-940.fm Page 11 Tuesday, April 25, 2000 1:04 PM