Radio Shack CID 940 - Manual (Page 14)

14 Operation
5. Press SET to toggle between the 12- and 24-hour formats,
then press
9 9 9 9
DOWN . Setup is complete.
When you first connect the receiver, the clock displays
12:00PM and the date 1/01 . When the first call comes in, the
current time and date are automatically set from the Caller ID
information provided by your phone company.
ˆ
Operation
RECEIVING AND STORING CALLS
Caller ID is a service provided by your telephone company.
When you subscribe to this service, the telephone company
sends the caller’s telephone number (and name, if available)
and the call’s date and time between the first and second rings.
The system receives and displays this information for each call
and updates the display with the current date and time. If the
caller’s name has more than 15 characters, only the first 15
characters appear. Your system saves up to 60 call records,
then replaces the oldest call record with each new one.
REVIEWING CALL RECORDS
Each time you receive a call, the system saves a call record in
memory and
NEW appears. Each call record includes the time
and date of the call, the call number (the order in which the call
was received), the caller’s telephone number, and the caller’s
name (if available).
43-940.fm Page 14 Tuesday, April 25, 2000 1:04 PM