Oki POS 425S - Manual (Page 32)

32 OKIPOS 425S
|
2.1.2 LED Function
A25004.doc
No. LED ON OFF Blinking
1 POWER Green Powered On Powered off -
2 LED 1
(ERROR)
Red Recoverable Alarms
*Slip Feed/Eject Alarm
*Auto Loading Alarm
*Auto Parking Alarm
*Media Mismatch
Alarm (1)
*Media Mismatch
Alarm (2)
*Cover Open Alarm
(Only OKI standard
type) Normal state *Unrecoverable Alarms
(blinking pattern indicates
alarm type)
*See the table in section 4.1
*SP Thermal alarm
(LED2 blinks concurrently)
*LF Thermal Alarm
3 LED2
(Status) Orange Paper is not fed
(In sheet-insertion wait
state) Paper has been
fed
(in print ready
state) *In sheet-extraction wait
state
*SP Thermal Alarm
(LED1 blinks concurrently)
Orange In Slip Mode In
Validation
mode
*Quick
blinking In MICR
Mode
*Slow
blinking 4 LED3/
LED4
(Mode)
Green In Receipt Mode
In Tractor
Mode
-
When “Cover Open Alarm” is set to No in Menu, Cover Open Alarm is disabled (printing does not stop).
* Media Does Not Match Alarm (1) is detected by monitoring the option tractor lever. Media Does Not
Match Alarm (2) is detected by the Validation sensor monitoring (media manually inserted into the
validation opening).