Oki POS 425S - Manual (Page 35)

|
Developer’s Guide: English 35
2.3 Menu Function (Receipt)
Overview
The menu function is the local function that sets each mode to control the printer and adjust it. This mode has the following
items, saved in the E2P-ROM. This information is printed only when the menu mode is activated at Power On, and the
information can be overwritten from the operator panel.
Menu Print is printed in Receipt Mode.
The menu determines the initialization state of each mode.
2.3.1 OEM — Standard Model
A25006.doc
No. Item Function Sets
1 Auto Cutter Unit Selects Auto Cutter Unit
Installed/Not Installed Yes
O No
2 MICR Unit Selects MICR Unit Installed/Not
Installed Yes (CMC-7)
Yes (E-13B)
O No
3 Print Registration Adjusts the print position if it
shifts in Forward printing and
Reverse printing 0.25mm Right
0.20mm Right
0.15mm Right
0.10mm Right
0.05mm Right
O 0
0.05mm Left
0.10mm Left
0.15mm Left
0.20mm Left
0.25mm Left
4 Top Adjust Adjusts Top of Form position
when Slip/Sprocket are used -1.75mm ~+1.75mm
*Can be set in the 0.35mm
unit
*Default value: 0 mm
5 Cut Adjust Adjusts Cut Position when cutting
Sprocket paper -1.75mm ~+1.75mm
*Can be set in the 0.35mm
unit
*Default value: 0 mm
6 Width of Roll Paper Selects the paper width of Roll
paper.
(Changes the print area) O 76.2mm
69.5mm
O = default value
Note For No. 3, 4, and 5, adjust to the proper values at factory shipment.