9 micr specifications (only with micr type), 1 available fonts, 2 scanning speed – Oki POS 425S User Manual
Page 89: 3 recognition rating, 4 reliability, 5 readable area, 6 media specifications, 7 other relevant standards
|
Developer’s Guide: English
89
5.9 MICR Specifications (Only with MICR type)
5.9.1 Available Fonts
E-13B and CMC7 (can be selected command)
5.9.2 Scanning Speed
9.2 inches / sec
5.9.3 Recognition Rating
95% or more at 25°C
Rating = ([total checks - number misread or not identified] / total checks) x 100
Check paper tested is OKI recognized check paper
5.9.4 Reliability
Life:
240,000 passes
Passes: reading and printing on U.S. personal check 152mm long
5.9.5 Readable Area
Conforms to the APPENDIX B MEDIA SPECIFICATIONS 4
5.9.6 Media Specifications
Conforms to the APPENDIX B MEDIA SPECIFICATIONS 4
5.9.7 Other Relevant Standards
The above specifications given in sections 5.9.4 and 5.9.5 take precedence over the standards shown below.
1
ANSI X9.13 American National Standard Specification for Placement and Location of MICR Printing - May 1990
2
ANSI X9 / TG-2 ANSI Technical Guideline: Understanding and Designing Checks, Guideline for the standardization of
check writing, check design and data element location - 1990
3
ANSI X9.27 American National Standard Specification for Print Specification for Magnetic Ink Character Recognition
(MICR) - August 1988
4
ISO 2033-1983 Information Processing - Coding of Machine Readable Characters (MICR & OCR)
5
ISO 1004-1997 Information Processing - Magnetic Ink Character Recognition - Print Specifications