Oki POS 425S User Manual
Page 45
Advertising
|
Developer’s Guide: English
45
4.
Swing the front of the cartridge up off the printhead, then lift the cartridge out and discard it.
Caution! The printhead may be HOT!
o425_06.jpg
5.
Unpack the ribbon cartridge.
Important! Do NOT remove the ribbon shield (1) from the ribbon!
o425_07.jpg
1
Ribbon Shield
2
Take-up Knob
3
Grip Points
6.
Install the new ribbon cartridge.
1)
Hold the ribbon cartridge as shown below.
o425_08.jpg
2)
Fit the grooves in the flat end of the cartridge over the posts on the ribbon plate.
1
3
2
Advertising