Omron Professional Blood Pressure Monitor HBP-1300 User Manual
Page 17
15
Using th
e Unit
Battery charging
Battery level
Connecting the AC Adapter
AC power
Verify that the power outlet supplies the specified voltage and frequency (100 - 240 V AC, 50/60 Hz).
Connect the AC adapter to the DC jack on the unit and the power outlet.
Note:
When the optional battery pack is installed
If there is no problem with the following.
- AC adapter
- DC jack
- Power outlet
- Battery
And the
icon does not flash, contact OMRON HEALTHCARE Customer Service.
State
LCD contents and operations
Icon
Charging
The icon is flashed.
Fully charged
(Charging completed)
The icon is lit.
Problem with the
battery
Error message is displayed.
-
Battery level
LCD contents and operations
Icon
Fully charged
The icon is lit.
The unit can be used.
Battery level is 20%.
The icon is flashed (E40 error not displayed).
The unit can be used.
Battery level is 5%.
The icon is flashed (E40 error displayed).
The unit cannot be used.
If the unit is being continuously used, the power will be
automatically turned off in 30 seconds.
HBP-1300.book Page 15 Wednesday, March 7, 2012 9:28 AM