Omega Speaker Systems VR200 - Manual (Page 19)

2 - 8
2.2.15 Setting the LCD Brightness and LCD Saver (LCD)
(See Section 4.8 of the instruction manual for the VR200.)
Format: SCp1, p2, p3
p1: LCD brightness level. 0 to 15
p2: Sets the LCD saver function “ON” or “OFF.”
p3: Timer setting to activate the LCD saver. Select from 1, 2, 5, 10,
30, and 60 (minutes).
Example: SC8, ON, 10
This example sets the brightness level to 8 and the LCD saver to be activated
in 10 minutes after the last key operation.
2.2.16 Setting the Summer/ Winter Time (DST)
(See Section 5.6 of the instruction manual for the VR200.)
Format: SSp1, p2
p1: “SUMMER” or “WINTER”
p2: Date and time (YY/MM/DD HH)
Example: SSWINTER, 96/10/10 01
2.2.17 Message setting (MESSAGE, only for the VR 200 with style number 2 or
higher)
(See Section 4.8 of the instruction manual for the VR200.)
Format: SMp1, p2
p1: Message number (1 to 5)
p2: Message string (16 characters or less)
Example: SM3, MOTOR ON
Assign the message "MOTOR ON" to message 3.
2.2.18 Setting of the Number of Divisions of the Bar Graph Scale
(BAR_SCALE_DIV, for the VR 200 with style number 2 or higher)
(See Section 4.9 of the instruction manual for the VR200.)
Format: SHp1, p2
p1: Channel number (CC)
p2: Number of divisions (4 to 12)
Example: SH03, 7
2.2.19 ON/OFF Setting of the Waveform Span Rate Display, ON/OFF Setting of the
Message Menu (SPECIAL, for the VR 200 with style number 2 or higher)
(for VR200 only, see section 4.10 in the instruction manual)
Format: SXp1, p2
p1: Turn ON/OFF the waveform span rate display on the trend
display screen
p2: Turn ON/OFF the message writing menu in the operation mode
Example: SXON, OFF