Omega Speaker Systems VR200 - Manual (Page 30)

3 - 5
3 TRANSMITTING FUNCTIONS
3.2.4 Output Format of Unit and Decimal Point Information
When receiving the TS2, ESC T, and LF commands, the VR200 recorder sends the
information on the unit and decimal point in the following format. The channel
numbers can be specified with the LF command.
C
R
L
F ,
N: Normal
D: Difference computation channel
S: Skipped channel
Decimal point position
This number indicates the number of
digits after the decimal point (0 to 4).
Data status Space: Not the last data
E: End of data
Channel number (2 characters)
Engineering unit (6 characters)
,
3.2 Output Data Formats