OnStar 17572 R17 - Manual (Page 11)

9
TO RECORD:
1. While you’re on the call, push the blue OnStar button .
You will hear the system beep (starts recording).
2. To stop recording, push the blue OnStar button again.
You will hear the system beep again (ends recording).
Note: Start of recording may be delayed up to fi ve seconds to clear any
previous recorded information. Recording starts immediately after the
last beep. Your voice and the Advisor’s voice will be recorded.
TO RECALL STORED INFORMATION:
1. Push the phone button . When OnStar responds with
“OnStar ready,” say “Advisor playback.”
2. Your recorded information plays back.
3. Push the phone button again to stop the playback (if you need
to
pause).
4. To continue your paused playback, push the phone button again
and
say “Advisor playback.” OnStar responds with “Please
say play, or resume.”
5. Say “Resume” to continue playback from where it was
previously stopped or “Play” to start at the beginning.
Recording Driving Directions - Advisor Playback
What was that again? Your OnStar system is equipped with an
Advisor playback recorder to store information given to you during
a call with an OnStar Advisor, like driving directions or Hands-Free
Calling instructions. You can play back the stored audio information at a
later time.
17572 R17 9.28.06_singlepgs.inddSec1:11 Sec1:11 17572 R17 9.28.06_singlepgs.inddSec1:11 Sec1:11 10/5/06 2:27:21 PM 10/5/06 2:27:21 PM