OnStar 17572 R17 - Manual (Page 33)

31
Your Subscriber Information Kit includes a CD. Listen to Track 8 to hear
how it sounds when you dial into voice-mail systems.
1. Push the phone button . When OnStar responds with
“OnStar
ready,” use the “Dial” or “Call” command to dial
the number you wish to call.
2. Once you reach an automated phone system or voicemail and
you need to enter a digit, or dial the star key or pound key,
push the steering wheel control . (You may have to push
and hold the button for a few seconds.)
3. When OnStar responds with “Say digit or send nametag,”
say the digit you want to dial. The system will repeat it;
then say, “Dial,” and the digit will dial.
• For the pound digit (#), you must say “pound key”
• For the star digit (*), you must say “star key”
4. If you need to dial several numbers for an extension, or you
need to enter numbers for a password, continue speaking
digits one at a time, waiting for each to be repeated. When
fi
nished, say “Dial” and OnStar will send all the digit tones.
Remember: After you say “Dial” and digits are dialed, you
must push the steering wheel mute button each time you need
to enter more digits.
Voicemail commands
OnStar Hands-Free Calling
NOTE: You can store a series of numbers as a nametag and have
them dial automatically. Respond to the “Say digit or send nametag”
request by saying “send nametag.” This is a faster way to dial
digits into systems that require a series of numbers. See page 33 for
instructions on storing your voice mailbox number and password.
17572 R17 9.28.06_singlepgs.inddSec1:33 Sec1:33 17572 R17 9.28.06_singlepgs.inddSec1:33 Sec1:33 10/5/06 2:28:14 PM 10/5/06 2:28:14 PM