OnStar 17572 R17 - Manual (Page 5)

3
System Status
To the right of the OnStar buttons is a System Status light. Your vehicle runs
an OnStar systems check every time you start up. This light is designed to
indicate to you that your OnStar system is active and ready to make calls. On
vehicles with an automatic dimming rearview mirror, the green light on the
left side of the button indicates that the automatic dimming function is on.
Solid Green - indicates the OnStar system is fully functional
and ready to make or receive calls.
Flashing Green - when you are on a phone call or when
someone is calling you, the green light will fl ash.
Red - indicates that your OnStar system has detected a
problem within the system. Push your OnStar button
and ask your OnStar Advisor to run a diagnostic check. If you
cannot connect to OnStar please visit a dealer for service
as soon as possible.
No Light - this indicates that your OnStar subscription is not
active or has expired. All services have been deactivated and
are not functional. Push the blue OnStar button and wait until
your system connects to an Advisor who can renew your
subscription. See page 38 for Subscription information.
* OnStar Hands-Free Calling requires a Hands-Free enabled vehicle, existing OnStar service
contract and prepaid minutes or enrollment in a shared minutes plan. Not available in certain
markets. Calls may be made to the US and Canada only. See “Additional Information”
section on pages 38-43 for system limitations and details.
17572 R17 9.28.06_singlepgs.inddSec1:5 Sec1:5 17572 R17 9.28.06_singlepgs.inddSec1:5 Sec1:5 10/5/06 2:27:04 PM 10/5/06 2:27:04 PM