Onkyo TX-DS484 - Manual (Page 10)

10
•
If you want to use the surround effects, connect surround speakers. For the best results, connect a center speaker.
•
Use FRONT SPEAKERS B terminals to connect a second pair of front speakers.
•
This receiver is designed to produce optimum sound quality when speakers with impedances within the specified ranges are con-
nected. Please check the following information and choose speakers with appropriate impedances for the connections.
FRONT SPEAKERS: A or B: 6 ohms min./speaker
SURROUND SPEAKERS: 6 ohms min./speaker
CENTER SPEAKER: 6 ohms min.
15 mm
2. Unscrew.
1. Twist wire ends very tight.
3. Insert the wire. 4. Screw.
REMOTE CONTROL
CD
AM
FM 75
ANTENNA
GND
PHONO
R
L
R L
(PLAY)
(REC)
OUT
I N
MONI-
TOR
OUT
SUB
WOOFER
PRE OUT
SURROUND
2 1
FRONT
R R
A
B
L L
R L
TAPE
VIDEO 1
CENTER SUB
WOOFER
R L V
VIDEO 2
DVD
CENTER R L
DIGITAL INPUT
FRONT SPEAKERS
R L
SPEAKER
CENTER
SPEAKERS
SURROUND
COAXIAL COAXIAL OPTICAL
MULT I CH I NPUT
OUT
I N
I N
I N
TX-DS484
AC OUTLETS
AC 230V 50Hz
SWITCHED
TOTAL 100W MAX.
+ – + –
+ – + –
L ch. R ch.
R ch. L ch.
+ – + –
R ch. L ch.
Front Speakers A
Front Speakers B
Surround Speakers Active subwoofer
– +
Center Speaker
NO
Connecting the speaker cable
NOTE:
To prevent damage to circuitry,
never short-circuit the positive (+)
and negative (–) speaker wire.
•
When you use only one speaker or wish to listen
to monaural (mono) sound, a single speaker
should never be connected in parallel to both the
right and left channel terminals simultaneously.
+ – – + + – – +
R L R L
Connecting speakers