Onkyo TX-DS484 - Manual (Page 25)

25
Recording a source
•
You can record analog Audio, but not digital audio. Make sure that you have made a correct analog connection.
•
You cannot record the source connected to MULTI CH INPUT jack.
•
If you select another device as the input source during recording, the input signal from that device will be recorded.
•
You cannot record audio source along with the surround effects.
Make all connections between the tape deck and the receiver as
shown in the “Audio equipment connections” diagram (page 6).
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the source you want to
record.
•
If you select DVD, VIDEO 1 or VIDEO 2, only the audio will
be recorded.
•
If you select FM or AM, set the tuner to the station you want to
record.
3. Set the tape deck in recording mode. Start playing the
source.
Set the proper recording level using the controls on the tape
deck.
•
Please read the corresponding instruction manuals for more
information on how to operate the corresponding equipment.
Recording an audio source
OFF ON
POWER
STANDBY/ON
BASS TREBLE
C D PHONES
DIMMER
TX-DS484 AV RECEIVER
AM FM DVD PHONO 1 VIDEO 2 VIDEO TI CH INPUT MUL TAPE
STANDBY
TUNING
CLEAR
MEMORY FM MODE SPEAKERS A B LATE NIGHT SURROUND MODE
PARAMETER CONTROLLER
PARAMETER SELECTOR
PRESET
U P
MASTER VOLUME
D O W N
Tape deck
(TAPE)
Turntable
CD player
DVD
VCR, VDP
1·3 3
2
1
C D AM FM
DVD
PHONO
1 VIDEO 2 VIDEO
2