Olympus MAUSB-100 - Manual (Page 8)

8
<98/98 SE
ࡗInstall>
4. During installation, the window at right appears.
● The installation time may vary, depending on your
computer.
5. When the device driver/utility software installation
is complete, the window at right appears. Select
[Yes, I want to restart my computer now.] if you
are ready, then click [Finish].
● The computer restarts.
The device driver/utility software is now installed.
Once the device driver/utility software has been installed, the MAUSB-100 will be recognized automatically
whenever it is plugged into the computer. (Remove the CD-ROM from the CD-ROM drive and store it in a safe
place.)