Oki S900 - Manual (Page 43)

USING THE S900 AS A SCANNER > 43
CUSTOM SETTINGS
Click on the Custom Settings button to access a dialog box
where you can save your scan settings and configuration
settings. There are two tabs: Scan Settings and
Configuration Settings.
Scan settings
The Scan Settings tab allows you to save your scanning feature
settings in a file, load an existing file, or delete an existing file.
Saving a scan settings file
Type a name for your settings in the File Name text box and click on
the Save button. Your settings will be saved and the file name will
appear in the list box.
Using a scan settings file
You can use an existing settings file. Right-click on the file name for
the settings you want to use and click on the
Load button. The settings
in the file will automatically be specified in the scanning features
dialog box.
Deleting a scan settings file
Right-click on a file name and press the Delete button on the
computer keyboard to delete the file.
Configuration settings
The Configuration Settings tab allows you to customise some special
settings.
Energy Saving Mode—check the Enable box to enable energy saving.
You can specify a time delay in the
Minutes box. Click on the Apply
button to save the changes.
Hint Setting—check the Show Hints box if you want flags that show
the name of the item to appear when you place the mouse cursor on
an item in the dialog box. Click on the
Apply button to save the
changes.