Replacing the adf snap-in pad module – Oki S900 User Manual
Page 49
Advertising
MAINTENANCE > 49
REPLACING THE ADF SNAP-IN PAD MODULE
After approximately 20,000 pages have been fed through the ADF, the
ADF pad may be worn out, and you may experience problems with
document feeding. In this case, it is recommended that you replace
the pad module with a new one. To order a new pad module, contact
your Oki dealer.
1.
Lift the release button (1) on the ADF front cover and carefully
open the ADF front cover.
2.
Press both arms of the ADF snap-in pad module (1) inward with two
fingers and pull out the module.
1
2
Advertising