Oki S900 - Manual (Page 70)

APPENDIX D – SETTING UP > 70
CONNECTING THE CABLES
Connect the cables as shown.
1. IEEE1394 cable – to the IEEE1394 data port on the printer.
2. USB cable – to the PC’s USB port. Only required for scanning
images into the PC. Does not support printing from the PC via
USB.
3. ADF cable – attached to the ADF if you have one.
CAUTION!
Do not connect AC power to the S900 until you have unlocked the
scanning head, otherwise damage to the Scancopier may result.
1
2
3