Cleaning the adf – Oki S900 User Manual
Page 47
MAINTENANCE > 47
ADF
Disregard this and the following section if you do not have an ADF.
CLEANING THE ADF
From time to time, the pad assembly and feeding rollers of the ADF
may become contaminated with ink, toner particles or paper dust. In
this event, the ADF may not feed documents smoothly. If this occurs,
follow the cleaning procedure below.
1.
Moisten a cotton swab with a non-corrosive solvent such as
isopropyl alcohol (purity at least 95%).
2.
Lift the release button (1) on the ADF front cover and carefully
open the ADF front cover.
3.
Wipe the feeding rollers (2) by moving the swab from side to
side. Rotate the rollers forward with your finger and repeat
wiping until the rollers are clean. Be careful not to snag or
damage the ADF pad (3) springs.
1
2
2
3