Optiview G0521 - Manual (Page 47)

DVR Server Manual ver.5.05/rel.092507
43
【Sensor NO】Select one sensor to be set.
【Sensor Name】Enter the name description of the sensor.
【Type】
Select alarm type (sensor type) from ―NO‖(Normally Open) or ―NC‖(Normally Close).
【Policy】 Selecting ―Sensor Alarm Handling‖ firstly, handling policies will be available as
follows:
Audible warning —Indicates the alarm with voice.
Upload to DVR Server —Update the alarm information to DVR system.
Trigger alarm out —Trigger alarm box to output the alarm.
【Trigger record camera】Set cameras to record when triggered by an alarm. You can select
one or more channels. When there is an alarm input, the cameras will be triggered to record (the
record type of the channel is Alarm Record), and the monitor will switch to preview the cameras
(warning on monitor is enabled).
【Preset】Set camera that will move to its one preset position when the alarm occurs.
【Schedule】Set alarm input precaution time first, then set the time segment according to the
sequence. The time of each segment should not overlap the others and no skips are allowed. After
the precaution time of a certain day is set, you can copy the parameter to other dates by selecting a
day and pressing the copy button.
【Copy to】 After finishing one channel, if you want to set any other channels‘ configuration as
the same as this camera, you can select the channel number from drop-list, and press
button.