Optiview G0521 - Manual (Page 52)

DVR Server Manual ver.5.05/rel.092507
48
4.2.1 Press this button to open all playback windows in sequence according to the
order of the cameras.
4.2.3 Press this button to close all playback windows.
4.2.4 / Previous / Next frame: press these two buttons to look at the previous or
next frame.
4.2.5 Reverse play: press this button continuously to play video reversely, the speed is
determined by the following playing speed adjustment bar.
4.2.6 / Play/Pause: This button will alternate between Play and Pause. When it
is playing, it will show and press it to stop, and then the button will show . When you
select reverse playing, it will show to play by pressing it.
4.2.7 Stop: press this button to stop playing.
4.2.8 First frame of that day, previous minute, Next minute
and last frame of that day.
4.2.9 Image zooms out. Press this button, Left-Single-Click an image; quarter of the
image will be enlarged. Right-Single-Click the image again, it will resume to normal.
4.2.10 Adjust the voice: drag the bar to adjust the voice and click
the left button to clear the voice.
4.2.11 Adjust playing speed: drag the bar to adjust the playing
speed and click the left button to resume normal playing speed.
*Note: It is not suggested that multi-channel (more than 10 channels) record or playback
simultaneously unless your PC has an advanced configuration, because the data throughput of HDD
is huge in that case. Multi-channel search in client and server are the same except for their paths. In
client, they are in local; in remote search, it searches among the record data in server in the local
network.