Optiview G0521 - Manual (Page 9)

DVR Server Manual ver.5.05/rel.092507
5
DVR system will pop up information to inform you of the failure of recording and the corresponding
camera will stop recording.
1.2.3 Interface description
1. Partition mode
button to set the window‘s partition mode of the main screen. There are many types of
partitions. The available partition is determined by the total channels of the card. You can select
the suitable partition according to the number of video inputs; the partition number which is
bigger than total channel is not available with gray.
2. Videos-play-in-sequence mode switch
Press button to switch between playing all cameras in current windows in sequence and
not when the current partition number is smaller than the total channels of the card.
3. Emergency recording button
Press button to trigger recording of all cameras for 30 seconds even if they have
been set to record by any other modes. This function is useful to deal with emergency
situation where quick response is required.
4. Image capture
Press button to save a still image of selected camera to local hard disk for
reviewing or print.
5. Manual record switch
Press button to record manually and press it again to stop manual recording for
selected camera.
6. Information display panel
This panel shows day of the week, current date, current time, total free hard disk space, current