Oricom SECURE 200 - Manual (Page 12)

10 BASIC OpERATION
Baby alert!
You can set your Parent Unit to give an extra warning
"beep" when the noise levels in your baby's room is
high and the red lights on the sound sensor are lit. This
is particularly useful if the volume of your Parent Unit is
turned down and you are just using the sensor lights to
monitor the noise levels in your baby's room.
Follow the "Sound Alert setting" on the menu setting section
to set the Sound Alert on or off, and adjust the alert volume.
Paging
If the Parent Unit is misplaced, you can use [ ] button on
the Baby Unit to locate the Parent Unit.
• Press and hold [ ] for 2 seconds on the Baby Unit.
The Parent Unit will automatically reset to mid volume
and the paging alert will sound.
• To stop the Page alert, press any button on the
Parent Unit, or press [ ] again on the Baby Unit.
Note:
If no button is pressed, the paging tone will stop after 2
minutes.
If the Parent Unit volume is off, the Parent Unit volume will
reset to mid-volume.
Night light
The Baby Unit has a night light which emits a soft starry
glow, providing comfort and reassurance for your baby and
allowing you to see them in a darkened room.
On the baby unit
Press [ ] key on the top of the baby unit. A soft light will
turn on gently. Press again and the light will fade away.
On the parent unit
Press [ ] key and use [ / ] keys to select "Night Light",
then press [ OK ] key to turn on or off the night light.
Lullaby
Your baby can be soothed to sleep by a gentle lullaby
from the Baby Unit. There are 5 tunes to choose from.
The lullaby feature can be turned on and off from both the
Baby Unit and the Parent Unit and is indicated on both by
a musical note icon. The icon and the lullaby title show
on both Displays when the lullaby is playing. The lullabies
will play for 15 minutes. We recommend that you use the
lullaby setting at the lowest volume setting which comforts
your baby.
On the Baby Unit
1. Press [ ] key. The lullaby is shown on the display.