Getting started, Interference free frequency, Pack contents – Oricom SECURE 200 User Manual

Page 5: Installation

Advertising
background image

3

Thank you for choosing this monitor from Oricom.
Your Secure 200 Baby Monitor offers the best Digital

Technology.

INTERFERENCE
FREE FREQUENCY

DECT (Digital Enhanced Cordless Telecommunications) is the

most widely used worldwide digital cordless technology, offering

amazingly clear sound, long range and maximum voice security.
DECT operates on the 1.8Ghz frequency which eliminates potential

interference from other common wireless devices such as cordless

telephones, wireless networks (Wi-Fi), Bluetooth and cordless

computer devices.

Pack Contents

Depending on the model you have purchased this pack

should contain the following items:

If any of these items are missing, please contact Oricom

directly.

SC200

SC200-2

Parent unit (receiver)

1

2

Baby unit (sender)

1

1

Mains adaptor with charger pod

1

2

NiMH rechargeable battery pack

(2.4V, 750mAh)

1

2

Mains adaptor with power cord

1

1

GETTING STARTED

Installation

For the Parent Unit

1. Remove the Belt Clip by lifting

the clip at the top and sliding it

downwards.

2. Then remove the battery cover

on the back of the Parent

Unit by pressing and sliding it

downwards.

Note:
Observe the correct polarity and direction of the battery

pack when inserting. The black lip of the battery pack

must be facing downwards as illustrated. The unit will not

operate if the battery pack is inserted incorrectly.

3. Insert the rechargeable battery pack

(supplied) as illustrated and close the

battery cover again.

4. Place the Parent Unit into the Charger Pod.
5. Plug the mains adaptor into a mains power socket.
The red charger light on the charger pod will illuminate

indicating that the Parent Unit is charging.

(the light will remain on to ensure optimum charge is

maintained).

clip

battery cover

Advertising