Oricom SECURE 200 - Manual (Page 17)

15 MENu SETTINGS
1. Press [ ] key on the parent unit and use [ / ] keys
to select "Sensitivity". The display is shown below:
2. Press [ OK ] key and then use [ / ] keys to select the
sensitivity level. There are 5 levels.
3. Press [ OK ] key to confirm and "Saved" is shown on
the display.
Sound Alert Setting
You can set the sound alert of the parent unit on or off, and
also the volume of the sound alert.
Press [ ] key on the parent unit and use [ / ] keys to
select "Sound Alert". The display is shown below:
Set On or Off
1. Press [ OK ] key, "On?" or "Off?" is shown on the
display, press [ OK ] key to select Sound Alert on or off
and "Saved" will be displayed on the parent unit.
Adjust Volume
2. In the Sound Alert setting menu, use [ / ] keys to
select "Volume" and press [ OK ] key.
3. Use [ / ] keys to select the volume level. There are 5
volume levels.
4. Press [ OK ] key to confirm and "Saved" will be shown
on the display.
Temperature Setting
You can monitor the temperature in the baby's room on
both the parent and baby unit.
You can select the baby room temperature alert range. The
lower limit can be set from 18°C to 25°C and the upper limit
from 19°C to 26°C. If selected an alert on the parent unit
will sound and the display will flash if the room temperature
falls outside the selected range.
Please note the baby monitor cannot manipulate the
temperature in your baby’s room, it only provides a
temperature reading.