Oricom SECURE 200 - Manual (Page 18)

16 MENu SETTINGS
Press [ ] key on the parent unit and use [ / ] keys to
select "Temperature". The display is shown below:
Set desired baby room temperature range
1. Press [ OK ] key, "Set Range" is shown on the display.
2. Press [ OK ] key, use [ / ] keys to set the upper and
lower temperature limits.
3. Press [ OK ] key to confirm and "Saved" is shown on
the display.
Set temperature alert
You can turn on and off the temperature alert on the Parent
Unit.
1. Use [ / ] keys to select "Temp Alert", and press [ OK ]
key to set the temperature alert on or off.
Set temperature alert volume
2. Or use [ / ] keys to select "Volume". There are 5
volume levels.
3. Press [ OK ] key, and use [ / ] keys to adjust volume
level, press [OK] key to confirm and "Saved" is shown
on the display.
Set degree Centigrade or Fahrenheit
You can choose whether to view the temperature of your
baby's room in degrees Centigrade or degrees Fahrenheit.
Your monitor is pre-set to Centigrade, but if you wish to
change it, follow the steps below:
1. In the Temperature setting menu, use [ / ] keys to
select "Degree F" or "Degree C".
2. Press [ OK ] key to confirm and "Saved" will be shown
on the display.
Clock Setting
You can set the current day and time on the Display of the
Parent Unit.
If you have unplugged your Baby Monitor from the power
supply, you will need to reset the Clock the next time you
use it.
1. Press
[ ] key on the parent unit and use [ / ] keys
to select "Clock", the display is shown below: