Oki POS 425D - Manual (Page 48)

48 OKIPOS 425D
|
4. Swing the front of the cartridge up off the printhead, then lift the cartridge out and discard it.
Caution! The printhead may be HOT!
o425_87.jpg
5. Unpack the ribbon cartridge.
Important! Do NOT remove the ribbon shield (1) from the ribbon!
o425_07.jpg
1 Ribbon Shield
2 Take-up Knob
3 Grip Points
6. Install the new ribbon cartridge.
1) Hold the ribbon cartridge as shown below.
o425_87.jpg
2) Fit the grooves in the flat end of the cartridge over the posts on the ribbon plate.
1
3
2