Oki POS 425D - Manual (Page 50)

50 OKIPOS 425D
|
3.2 Replacing the Roll Paper
When the Roll is used up, load a new one, following the procedure shown below.
3.2.1 Roll Paper (Receipt)
1. Press Form Feed switch (1) on Receipt side so that the whole Receipt Paper (2) is ejected.
o425_62.jpg
2. Press the Cover Open Bar and open the Printer Cover.
* Caution! The printhead may be HOT!
o425_31.jpg and o425_32.jpg
3. Load new paper roll.
For loading Roll Paper, refer to Section 1.5.1.2.
2
1