Oki POS 425D User Manual
Page 56
56
OKIPOS 425D
|
5.
Gently remove the paper left on the Auto Cutter.
Note:
When the blade of the Auto Cutter is exposed, turn the knob (1), and manually move the blade to the original
position.
o425_79.jpg
Note:
Turn on the power. If the Auto Cutter behaves abnormally, contact your shop or maintenance service.
Note:
Do not forcibly remove a piece of paper left in the Auto Cutter. Use a vacuum cleaner, or contact maintenance
service.
Cut-Sheet Paper
When cut-sheet paper gets jammed, remove the paper, following the procedure shown below:
1.
Press the Cover Open Bar and open the printer cover
* Print head may be hot. Exercise caution.
o425_31.jpg and o425_32.jpg
2.
Slowly pull out the paper upward or toward you while pulling the lever (1) [marked “PULL”] toward you.
Note:
Be careful not to leave small pieces of paper behind.
o425_60.jpg
1
1