Oki POS 425D - Manual (Page 84)

84 OKIPOS 425D
|
5.7.5.3.2 Paper Quality
Paper of the following quality may be used.
A25031.doc
Type Paper Quality
Single-part paper High quality paper
Multi-part paper Pressure-sensitive paper, Carbon-lined paper or Interleaved paper (1)
Note 1 Interleaved paper is a multi-part paper with carbons inserted between copies.
1 Paper smoothness must be 90 ~ 7 sec. for Beek and 75 ~ 300 sec. for Sheffield.
2 If you use paper other than that specified here, test it to verify that it prints without problems.
5.7.5.3.3 Paper Weight and Maximum Duplicating Quantity
The weight of paper usable for printing and max. duplicating quantity are shown in the table below.
A25032.doc
Type Paper Quality Weight Max Copies Total Paper
Thickness
Single-part
paper High quality paper 52~81 g/m 2 (14~21 lb) - -
Pressure-sensitive
paper, Carbon-
lined paper 34~40 g/m 2 (9~11lb) 4 copies (original
+ 3 copies) Multi-part
paper
Interleaved paper (1) 38~45 g/m 2 (10~12 lb)
Carbon 34 g/m 2 (9lb)
3 copies (original
+ 2 copies)
0.27mmm or less
Note 1 The thickness of carbon paper used for Interleaved paper must be 0.03 mm or less.