Olympus FL-36 - Manual (Page 25)

49 48
Setup mode
Mode display Value display
Function Default
Dial A Dial B
Wide panel
switch disabling The wide panel switch is activated. Use
this setting to detect that the wide panel
has been slid out.
GN (guide number)
indicator The flash intensity is displayed in a GN
(guide number).
The flash intensity is displayed in a light
intensity ratio.
on
on The wide panel switch is deactivated. Use
this setting when the wide panel is dam-
aged so that the firing angle can be
changed with the ZOOM button.
4-3
m
A
on
Setup mode
Mode display Value display
Function Default
Dial A Dial B
AF illuminator
Only works with the
Olympus Four Thirds
System digital SLR
camera. It does not work
with other cameras.
AF illuminator is activated according to the
control from the camera.
AF illuminator is defeated.
Flash cable Use this setting when not using the flash
cable (clipping on to the hot shoe).
Use this setting when using the flash cable
(off flash cable).
Firing angle
(ZOOM) display Firing angle (ZOOM) is displayed in terms
of the lens focal length of a FOUR
THIRDS digital camera.
Firing angle (ZOOM) is converted into the fo-
cal distance of the 135 type. This allows the
flash to be used in the same feeling as the
flash for a 135 type (35 mm film) camera.
Distance display
unit Distance is displayed in meters.
Distance is displayed in feet.
OFF
Light intensity
adjustment
Light intensity cannot be adjusted.
Light intensity can be adjusted.
ISO and F communi-
cation in AUTO mode
Only works with a
c a m e r a w i t h I S O
speed setting com-
munication capability
in AUTO mode. The ISO speed and lens iris (F) are auto-
matically set by the camera side.
The ISO speed and lens iris (F) can be
set with the select dial.
on